ZENworks Configuration Management (ZCM)

https://www.novell.com/documentation/zenworks-23.4/

/var/opt/novell/zenworks/content-repo                       # content repo

/opt/novell/zenworks/bin/zman

zman sss                                            #zman Service stoppen (shell-stop-service)
zman ssas                                           #zman Service starten (shell-start-as-service)
zman acc                                            #Admin Credentials löschen (admin-clear-credential)
zman asc                                            #Admin Credentials speichern (admin-store-credential) 
zman inventory-scan-now /devices/workstations/SIT   #Inventarscan unter dem definierten Pfad starten

zman sss
zman sui /var/opt/novell/ZENworks_20.1.0_Update.zip "ZENworks 2020 Update 1" -U=Administrator

zman sudu -f "ZENworks 2020 Update 1"
zman sudu -f "5020010000fc50000000002020060300"

Create temporary zdc folder

mkdir /tmp/ZENworksDiagnosticCenter_20.0.0

Copy zdc files to ZENworks server

scp .\ZENworksDiagnosticCenter_20.0.0.zip root@10.1.1.33:/tmp/ZENworksDiagnosticCenter_20.0.0/.

Unzip and run zdc

cd /tmp/ZENworksDiagnosticCenter_20.0.0/
unzip ZENworksDiagnosticCenter_20.0.0.zip
chmod 775 zdc
./zdc verify -v zendatabase,systemfiles,zencontent -b /tmp/ZENworksDiagnosticCenter_20.0.0/data/baseline_20.0.0.zdc

readme

bash zdc verify -v <verifiers> -b <path/to/baseline/file>

where verifiers can be:
   zendatabase
   auditdatabase
   systemfiles
   zencontent

Note 1 : You can specify multiple verifiers as comma separated values
Note 2 : You cannot specify zendatabase and auditdatabase together in the same command. They have to be verified separately.

For example:
zdc.bat verify -v zendatabase,systemfiles,zencontent -b c:\zdc\data\baseline_20.1.0.zdc
zdc.bat verify -v auditdatabase -b c:\zdc\data\baseline_20.1.0.zdc
For more detailed documentation for running ZDC, please refer to: Running ZDC in the ZENworks documentation

ZDC will run the diagnostic tests and generate the reports in HTML format in the reports/[date_time] subdirectory. If any inconsistency is found, it will be indicated on the screen and the details will be available in the reports. To view the reports, open "index.html" from the report folder. The complete log of the diagnostic tests is stored in the subdirectory logs/[date_time].log

Delete the folder created in step 1 above

novell-zenworks-configure -c Start
novell-zenworks-configure -c SystemStatus

Folder

/etc/opt/novell/zenworks/preboot/                           # preboot environment files
/opt/novell/zenworks/install/downloads/setup/_all           # ZENworks agent installer
/opt/novell/zenworks/install/downloads/setup/x86_64         # ZENworks agent installer

Files

/etc/opt/novell/novell-proxydhcp.conf
/etc/opt/novell/novell-tftp.conf

/var/opt/novell/log/novell-proxydhcp.log
/var/opt/novell/log/novell-tftp.log
/var/opt/novell/log/zenworks/*

https://support.microfocus.com/kb/doc.php?id=3418069

Befehl zum Testen des Scripts im Maintenance Mode

imaging.s

Alle Partitionen löschen, anschließend UEFI Partitionen anlegen

wipefs -a /dev/nvme*                                #löscht alle Partitionen auf NVMe SSD
(img -pd -all)                                      #löscht alle Partitionen (unzuverlässig), daher wipefs s. o.
img -pc 1 -type=NTFS -size=300 -guid=WRE            #Basic Data Partition (Boot)
img -pc 2 -type=FAT32 -size=100 -guid=ESP           #EFI system Partition
img -pc 3 -type=1 -size=128 -guid=MRP               #Microsoft reserved Partition
img -pc 4 -type=NTFS -guid=MBD                      #Basic Data Partition (Data)
img -pa 1                                           #Partition aktiv setzen
img -pa 2
img -pa 3

1. von Zenworks BootCD booten
2. Information zu betroffenem Gerät anzeigen (Beispiele):

hwinfo
hwinfo --disk
hwinfo --storage-ctrl

1. Treiber von hersteller downloaden

C:\Program Files (x86)\Novell\ZENworks\work\content-repo    # content repo
C:\Program Files (x86)\Novell\ZENworks\share\tftp           # linux boot image + tuxera ntfs driver

cli for zenworks agent

zac ref                    # refresh zenworks client
zac ref bypasscache        # refresh zenworks client without using servercache
zac zeus-ref               # refresh zenworks update service