Differences

This shows you the differences between two versions of the page.

--- linux:monit [2023/03/22 23:58] – [Konfiguration] admin
+++ linux:monit [2024/02/17 19:03] (current) – external edit 127.0.0.1
@@ Line 5: / Line 5: @@
 sudo apt update
 sudo apt install monit
-sudo systemctl start monit
-sudo systemctl enable monit
-sudo systemctl status monit
 </code>
+==== Monit als Dienst einrichten ====
+Unit File erstellen:
+<code bash>
+sudo nano /lib/systemd/system/monit.service
+</code>
+''/lib/systemd/system/monit.service''
+<code>
+# This file is systemd template for monit service. To
+# register monit with systemd, place the monit.service file
+# to the /lib/systemd/system/ directory and then start it
+# using systemctl (see below).
+#
+# Enable monit to start on boot:
+#         systemctl enable monit.service
+#
+# Start monit immediately:
+#         systemctl start monit.service
+#
+# Stop monit:
+#         systemctl stop monit.service
+#
+# Status:
+#         systemctl status monit.service
+[Unit]
+Description=Pro-active monitoring utility for unix systems
+After=network-online.target
+Documentation=man:monit(1) https://mmonit.com/wiki/Monit/HowTo
+[Service]
+Type=simple
+KillMode=process
+ExecStart=/bin/monit -I
+ExecStop=/bin/monit quit
+ExecReload=/bin/monit reload
+Restart = on-abnormal
+StandardOutput=null
+[Install]
+WantedBy=multi-user.target
+</code>
+Monit aktivieren und starten:
+<code>
+sudo systemctl enable monit.service
+sudo systemctl start monit.service
+sudo systemctl status monit.service
+</code>
 ===== Konfiguration =====
-''/etc/monit/conf-enabled/monit.conf'' erstellen:
+Monit Config File bearbeiten:
+<code bash>
+sudo nano /etc/monit/monitrc
+</code>
+''/etc/monit/monitrc''
 <code>
+# reporting to mmonit
+set mmonit http://agent:monit@localhost:8080/collector
+# webservice
 set httpd port 2812 and
     use address localhost  # only accept connection from localhost (drop if you use M/Monit)
     allow localhost        # allow localhost to connect to the server and
     allow admin:monit      # require user 'admin' with password 'monit'
+</code>
+give the appropriate permissions
+<code>
+sudo chmod 600 /etc/monit/monitrc
+</code>
+===== Befehle =====
+<code>
+sudo monit reload
+sudo monit status
+</code>
+''monit''
+<code bash>
+Usage: monit [options]+ [command]
+Options are as follows:
+ -c file       Use this control file
+ -d n          Run as a daemon once per n seconds
+ -g name       Set group name for monit commands
+ -l logfile    Print log information to this file
+ -p pidfile    Use this lock file in daemon mode
+ -s statefile  Set the file monit should write state information to
+ -I            Do not run in background (needed when run from init)
+ --id          Print Monit's unique ID
+ --resetid     Reset Monit's unique ID. Use with caution
+ -B            Batch command line mode (do not output tables or colors)
+ -t            Run syntax check for the control file
+ -v            Verbose mode, work noisy (diagnostic output)
+ -vv           Very verbose mode, same as -v plus log stacktrace on error
+ -H [filename] Print SHA1 and MD5 hashes of the file or of stdin if the
+               filename is omitted; monit will exit afterwards
+ -V            Print version number and patchlevel
+ -h            Print this text
+Optional commands are as follows:
+ start all             - Start all services
+ start <name>          - Only start the named service
+ stop all              - Stop all services
+ stop <name>           - Stop the named service
+ restart all           - Stop and start all services
+ restart <name>        - Only restart the named service
+ monitor all           - Enable monitoring of all services
+ monitor <name>        - Only enable monitoring of the named service
+ unmonitor all         - Disable monitoring of all services
+ unmonitor <name>      - Only disable monitoring of the named service
+ reload                - Reinitialize monit
+ status [name]         - Print full status information for service(s)
+ summary [name]        - Print short status information for service(s)
+ report [up|down|..]   - Report state of services. See manual for options
+ quit                  - Kill the monit daemon process
+ validate              - Check all services and start if not running
+ procmatch <pattern>   - Test process matching pattern
 </code>