sysctl -w net.ipv4.ip_default_ttl=128   #TTL temp. setzen 128 = Windows default
ping 192.168.1.1                        #Dauerping
ping -c 4 192.168.1.1                   #4 Pings
netstat -npl                            #offene Ports auflisten
lsof -i | grep -e LISTEN                #offene Ports auflisten
cat < /dev/tcp/127.0.0.1/22             #Teste Ports mit cat

/etc/network/interfaces.d /etc/network/interfaces

service networking restart

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug ens192
iface ens192 inet static
        address 10.1.1.25/24
        gateway 10.1.1.30
        # dns-* options are implemented by the resolvconf package, if installed
        dns-nameservers 10.1.1.32
        dns-search oes.ml-bw.de

sudo ip addr add 123.222.111.123 dev ens192             #temporär 2. IP hinzufügen (bis reboot)

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug ens192
iface ens192 inet dhcp

/etc/sysconfig/network/routes

Beispiel

default 192.168.63.1 - -

/etc/udev/rules.d/70-persistent-net.rules

Allgemein

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC-Adresse>", ATTR{type}=="1", KERNEL=="eth*", NAME="<ADAPTERNAME>"

Beispiel

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:85:54:00", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

/etc/sysconfig/network/ifcfg-eth0

Beispiel DHCP

BOOTPROTO='dhcp' 			#or static
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''				#assigned if static e.g. 10.6.7.203
MTU=''
NAME='AMD PCnet - Fast 79C971'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
UNIQUE='rBUF.weGuQ9ywYPF'
USERCONTROL='no'
_nm_name='bus-pci-0000:02:01.0'

Beispiel Statische IP

BOOTPROTO='static'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR='10.6.7.203'
MTU=''
NAME='AMD PCnet - Fast 79C971'
NETMASK='255.255.255.0'
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
UNIQUE='rBUF.weGuQ9ywYPF'
USERCONTROL='no'
_nm_name='bus-pci-0000:02:01.0'

/etc/HOSTNAME

Allgemein

<Computername>.<Domain>

/etc/resolve.conf

Allgemein

domain <Domain>
nameserver <IP_des_Servers>
nameserver <Ggf_IP_des_2._Servers>

Beispiel

domain site
nameserver 10.0.0.1
nameserver 10.0.0.2

/etc/hosts → vergleichbar wie in Windows

Allgemein

127.0.0.1   localhost
<lokale IP> <Computername>.<Domain> <Computername>

Beispiel

127.0.0.1       localhost
10.0.0.202      srstef.site srstef

http://jensd.be/343/linux/forward-a-tcp-port-to-another-ip-or-port-using-nat-with-iptables